FM | Front Upper Comp. Spacer Kit - Aluminum

Kit Includes: (2) Front Upper Comp Spacers - Aluminum.This part is located in the Front Upright [000-108] to fill space for the Upper 5/8x5/8 RH Hime [120-100] Application: Standard Formula...

000-158 : Front Control Arm | Heavy Duty

000-118 : Front Control Arm | Heavy Duty**This is an updated part and requires the following parts with it.000-159 Camber Sleeve | Heavy Duty (1)000-160 Camber Nut | Heavy Duty (1)120-126 Camber Hime | Heavy Duty (1)120-127 Control Arm Inner Hime |...

000-153 : Shock Top Mount | Single Adjustable Shock

Shock Top Mount | for Koni Single Adjustable Shock

000-145m : Wheel Center Bushing Kit (6 per)

Kit Includes: (6) Wheel Center Bushings [000-145]

000-141 : Shock Bump Rubber-Tall-55mm

000-126 : Top Shock Spring Retainer

000-150 : Shock Cir Clip

Nut, Washer + Clip Replacement for Wheel Nut + Cone Assembly

Nut, Washer + Clip Replacement Only - for One-Piece Wheel Nut + Cone Assembly (000-155)

000-142 : Top Shock Uniball

000-144m : Rocker Pivot Shaft Spacer Kit (2 per)

Kit Includes: (2) Rocker Pivot Shaft Spacers [000-144]

120-127m : Control Arm Inner Rod End + Nut | Heavy Duty

**This is an update part and requires the following parts to be used with it. 000-118 Front Control Arm | HD or 020-110 Rear Control Arm | HD000-159 Camber Adjustment Sleeve | Heavy Duty000-160 Camber Nut | Heavy Duty120-126 Camber Rod End | Heavy Duty...

000-152 : Shock Bump Rubber-Short-25mm

120-126: Camber Rod End Heavy Duty

**This is an update part and requires the following parts to be used with it. 000-118 Front Control Arm | HD or 020-110 Rear Control Arm | HD000-159 Camber Adjustment Sleeve | Heavy Duty120-126 Camber Hime | Heavy Duty (1)120-127 Control Arm Inner Rod...

000-119 : Camber Adjustment Sleeve

000-110m : Lower Pin Spacer Kit (2 per)

Kit of (2) Lower Pin SpacersLower Pin Spacer is used to space 1/2 X 1/2 Camber Hime [120-101] from nut on Front Upright Pin [000-109]. Application: Front Upright Spacer for Standard Formula...

000-136 : Rocker Stud

 

000-132 : Front Anti-Roll Bar Drop Link

000-121m : 7/16 Tapered Spacer Kit (4 per)

Kit Includes: (4) 7/16 Tapered Spacers [000-121]

FM | Outer Front Wheel Rim Half

Does not come with Schraeder Valve [000-107] or BBS Bolt Kit [000-106]. Schraeder Valve and BBS Bolt Kit should be replaced when replacing this Outer Front Rim Half. ...

000-108 : Front Upright

The Front Upright can be used on the right or left of the car. Application: Front Upright for Standard...

000-115m : Drive Pin + Nut Kit

Kit Includes: (1) Drive Pin [000-115] (1) Wheel Drive Pin Nut [000-116]

000-139 : 5/8 Front Roll Bar

 

000-124 : Rocker Right Side

FM | Hub Bearing Spacer

  The Hub Bearing Spacer is used inside the Upright to support the Wheel Bearings. Application: Standard Formula Mazda Material: Steel - Heat Treated ...